background image

 

SPEEDDOME ULTRA VII CAMERA DOME CONFIGURATION UTILITY 

8200-0184-09, REV. A 

OPERATOR’S MANUAL SUPPLEMENT 

11 of 13

 

Quick View™ Access Time............<1 second to position. 
 

Full zoom in <4 seconds. 

 

Focus on VM16, VM32 and  

 

VideoManager systems is <1 second. 

 

Focus on VM96 and RV2715 systems  

 

is <7 seconds 

Programmable Patterns 

Number Patterns.............................................................3 

Storage 

Program Storage ................ 256 Kbytes of Flash memory 

Data Storage .................................. 128 Kbytes of SRAM 

Configuration Menu 

Languages ................ English, French, German, Spanish, 
 

Italian, and Portuguese 

Electrical 

Input Voltage .................................... 18-30Vac, 50/60 Hz 
 

UL Class 2 LPS 

Design Tolerance.............................. 16-36Vac, 50/60 Hz 

Power Consumption ........................................ 16W max. 

Current........................................................... 0.85A max. 

Allowable Drop Out................................................100ms 

Power On In-Rush Current ....................................... 1.5A 

Surge Protection: 

Video Output................................Low capacitance Zener  
 

suppressor 6.5V, 1500W 

Power Line.......................... TVS rated at 60V, 1.5 joules,  
 

250A 8/20µs impulse 

RS422............................................TVS rated at 9.8V/1A,  
 

20V/25A, 500W,  

 8/20µs 

impulse 

Manchester/ 

SensorNet 485.................... Gas discharge tube rated at: 
 

8/20µs impulse discharge current 

 

of 10kA, ten 8/20µs impulse  

 

discharge current of 5kA 

 

Isolation transformer coupled 2000Vrms 

 

PTC fuse protects transformer. 

 

TVS rated at 9.8V/1A, 20V/25A, 

 

500W, 8/20µs impulse 

Alarm Input ....................................TVS rated at 9.8V/1A,  
 

20V/25A, 500W, 8/20µs impulse 

Alarms Inputs/Control Outputs: 

When no I/O board is used: 

Inputs........................................ 1 dry contact/3.5mA sink 

Outputs ......................................... 1 open collector driver 
 

@ 12Vdc, 40mA 

When I/O board is used: 

Inputs ...................................... 4 dry contacts/3.5mA sink 

Outputs ....................................... 4 open collector drivers 
 

@ 12Vdc, 40mA 

Environmental 

Operating Temperature........ –10° to 50°C (14° to 122°F) 

Relative Humidity .....................0 to 95% non-condensing 

Storage Temperature ................................ –20°C to 65°C 
 

(–4°F to 149°F) 

Mechanical 

Height.............................................................20.8cm (8") 

Eyeball Diameter............................................12cm (4.7") 

Weight: 

Housing and Eyeball.............................. 1.36kg (3 lbs.) 

Base (standard) ................................ 0.09kg (0.20 lbs.) 

Base (with I/O board)........................ 0.16kg (0.35 lbs.) 

Lens and Bubble Densities 

Eyeball Lens ......................................................... f0 

Bubbles: 

RUCLR (Clear) .................................................. f0 

RUSLV (Silver) ....................................... f1.5 to f2 

RUSMK (Smoke) ............................................ f0.5 

RUGLD (Gold) ........................................ f1.5 to f2 

Specifications-22X Camera 

Type .............................. Interline transfer

 

1/4" CCD array 

Scanning Area..................................3.2 (H) x 2.4 (V) mm 
Scanning System ..........................................2:1 interlace 
Video Out ............................1.0 Vp-p/75 ohms composite 
Signal-to-Noise.......................................... 50 dB (typical) 

Color Camera Only 

Horizontal Resolution .......................... 470 lines at center 
Minimum Illumination ...............0.3 lux (AGC On, 20 IRE) 
 

0.02 lux with ¼ s open shutter 

White Balance ............................ Through-the-Lens (TTL) 

 

Automatic Tracing White balance (ATW) 

NTSC: 

Effective Pixels............................768 (H) x 494 (V) pixels 
Scanning ...........................525 lines, 60 fields, 30 frames 
Horizontal ........................................................ 15.734kHz 
Vertical ..................................................................59.9Hz 

Summary of Contents for RAS915














Reviews: