Web Configuration
3-21
Configuring the Video Inputs
The Video Input Detail page allows the configuration of the video format and the camera control
protocol for each attached camera.
When using 4 CIF the video is automatically deinterlaced to give a better quality on motion.
The Serial ports and Sensornet configurations should be completed before the Video Input
configuration, as detailed in Procedure 3-17.
Procedure 3-17 Configuring the Video Inputs
1
Ensure that the browser is displaying the Configuration page (if not refer to Procedure 3-11).
2
From within the Video Inputs section select the
Edit
button of the first Video Input to be
configured.
A Video Input detail page is displayed, as shown in Figure 3-13.
Figure 3-13
Video Input Detail page
3
Enter the required
Name
for the Video Input.
4
Select the required
Video Format
from the drop down menu. The options are Auto, NTSC and
PAL. The default setting is Auto, which will auto detect the incoming video stream format.
5
If using 4 CIF the video is automatically deinterlaced to give better quality on motion. To disable
deinterlacing select
Disable
from the Deinterlace (4 CIF) drop down menu.
6
Select the required
PTZ Protocol
from the drop down menu. The options available in the drop
down list will vary with the protocols that are available. The default setting is None.
7
Select the required
Port
from the drop down menu
Note
For RS-422 and RS-485
Serial Port 2
must be selected.
8
If required enter the
Camera Address
. Certain PTZ protocols require each camera to have a
unique address which is sent in each command. If this is not required use the default setting of
0.
Summary of Contents for VideoEdge
