16
SRS-40 Owner’s Manual
The airline is routed using a 3/4” (200 psi) air hose. This delivery line should be free from all
obstructions. When connecting to an air tank (American Eagle recommends a minimum
of a ten gallon air tank be installed to maintain proper operation of the air compressor), a
check valve must be installed.
Air System
The hydraulic system consists of the pump, oil reservoir, filters and hoses. Installed on the
compressor is a valve block assembly that controls the flow to the hydraulic motor. To this
block, a 1/2” high-pressure hose must be attached. This hose comes from the pressure
side of the hydraulic pump. A 3/4” minimum low-pressure return line is connected to the
oil cooler outlet and is routed to the oil reservoir. American Eagle recommends a sufficient
sized reservoir be provided that includes the proper suction and return filters. The cooler
on the compressor is designed and sized to cool the air compressor efficiently. An auxil-
iary oil cooler is required when additional hydraulically operated equipment are added to
the hydraulic system. Pressure on the return line exceeding 200 PSI can and will cause
damage to the filter, cooler, and components of the compressor hydraulic system.
Hydraulic System
RETURN LINE
AIR DELIVERY
PRESSURE LINE
Summary of Contents for SRS-40
