Operations
Opening, Loading Tickets, and Programming Bins
1. OPENING THE VENDING MACHINE
The keys to open the Maxim™ are attached to the electrical cord for shipping. To prevent access to the money
compartment by unauthorized personnel, the Maxim™ is equipped with four locks. Two locks, one on each side
of the display hood, are keyed alike and allow access to the ticket bin area. The other two locks, which allow
access to the money compartment, are keyed alike, though differently from the display hood locks. (Figure 1)
Unlock the two locks on the front of the display hood. Pivot the display hood up and over the top. To open front
doors, lift up on the door locking lever. (Figure 2)
Remove the internal packing.
2. SECURITY ALARM
The Maxim™ is equipped with a security alarm designed to activate after the hood has been opened. Enter your
three-digit Personal Identification Number (PIN) within 20 seconds, or the alarm will sound.
The manager PIN is factory set to 111. (See Section 3, next page.)
If you have already set a new manager PIN, but have forgotten it, call your service provider for a one-time
manager access code.
NOW YOU’RE READY TO INSTALL YOUR MAXIM™. IF MOUNTING TO A WALL (Model 4200 only), SEE THE
INSTRUCTIONS INCLUDED WITH THE WALL MOUNTING BRACKETS. IF MOUNTING TO A MAXIM™
CABINET, SEE THE SETUP INSTRUCTIONS INCLUDED WITH THE CABINET.
Page 2
NOTICE:
• AFTER UNPACKING, CAREFULLY INSPECT THE MACHINE FOR DAMAGE.
• READ THESE INSTRUCTIONS THOROUGHLY BEFORE YOU INSTALL.
• REMOVE ALL PACKING – INSIDE AND OUTSIDE THE MACHINE – BEFORE YOU PLUG IT IN.
• USE ONLY INDOORS.
Figure 1
Figure 2
On 8400, bins are numbered 1 through 12, left to right.
On 4200, bins are numbered 1 through 6, left to right.
Page 13