11.
Follow this same process for the end rails and blinds.
12.
For both long side rail/blind assemblies, thread the threaded rods into all rail inserts being
sure to hand tighten before proceeding to the next step
Do not touch the End Rails or End Blinds yet.
13.
Take the two long rail/blind assemblies and position by lining up the rail bolt holes in the
slate and the cooresponding threaded rods of the rail. Hand tighten the rails using the domed
washer and nut. (Dome of washer faces down)
14.
Slide the end rail/blind assembly onto the table making sure both corners align with the side
rail/blind assemblies. Repeat this step for both ends of the table.
15.
Once all four corners are flush, attach the end blind to the side blind using the cleats to
ensure that all four corners stay flush during the following steps.
Threaded
Rod
Summary of Contents for QUEST 8' BILLIARD TABLE
Page 1: ...QUEST 8 BILLIARD TABLE ...