RM4200 Series User Guide
Configuration
34
Setting Transmission and Measurement Schedules
The transmission schedule determines when and how often the measurements (stored in a data log) are
transmitted to your Bullhorn Web account. However, measurements will also be sent to your account before the
data log exceeds the memory limit allowed on the unit.
On the
Reporting & Power
window, you can set up a transmission schedule for regular transmissions to your
account. When these reports arrive to your Bullhorn Web, they will be denoted as
Scheduled Transmission
under
the
Packet Reason
column of the
Incoming Packets
tab.
Figure 3-14. Incoming Packets Tab
Also on the
Reporting & Power
window, you can set when and how often measurements are taken and stored in
the data log. The data log will be transmitted to your Bullhorn Web account during the scheduled transmission
time. You can create two different measurement schedules that can be applied individually or together for any
Reading.
Occasionally, the unit data cache may become full and cause it to transmit the collected measurements prior to
the scheduled time. When these reports arrive to your Bullhorn Web account, they will be denoted as
Packet
Ready
under the
Packet Reason
column of the
Incoming Packets
tab. These types of transmissions are
in
addition
to the regularly scheduled transmission times and do not replace scheduled transmissions.
