STEP 7 REMOVE SEAT AND SEAT TRAY
Remove the seat cushion by lifting the rear of the seat, pivoting the
seat on the front of the seat surround. Once the seat is in the vertical
position, lift it clear of the surround. With the seat removed, you may
now lift the front edge of the under-seat tray, and removing it.
STEP 9 AUX BLOCK AND / OR FRONT RECEIVER
STEP 8 DISCONNECT BATTERY
If not already equipped, install the auxiliary distribution block at this
time. Follow the instructions included in kit 17233. Additionally, if the
unit is not already equipped with the required front receiver, install
that now following the instructions included in that kit.
Disconnect the battery wires using a 7/16 wrench and socket.
15961 Rev. C
page 4 of 7
positive
negative
fr
ont of v
ehicle
48V UNIT BATTERY DISCONNECTION
