©
202 0 Escalad e Sports
Fo r Custome r Servic e Cal l 1-888-996-2729
9
All Rights Reserved.
PARTS REQUIRED
2pcs -
P10
Manual Scorer
1pc -
P11
Bowling Pin Side Block-A
1pc -
P12
Bowling Pin Back Block
1pc -
P13
Bowling Pin Side Block-B
4pcs -
H4
Phillips Flat Head Screw
6pcs -
H5
Phillips Flat Head Screw
Attach the
P10
Manual Scorers onto the top rails using the
H4
Flat
Head screws and pilot holes as shown in
FIGURE 6.
FIGURE 6
STEP 6
P10
H4
P10
H4
A8
A7
Tighten, but DO NOT strip out the screws.
Pilot Holes
Note: The Bowling Pin Block is
designed to help keep the pins on
the table during play.
H5
H5
P13
H5
H5
P11
P12
A4
AC/DC
Adapter
C3 ON/OFF Switch
Connect the cord/plug of A/C Adapter here
Do not allow Adapter cord to become a trip
hazard
.
Unplug A/C Adapter after each use.
Attach the
P11
Bowling Pin Side Block-A and the
P13
Bowling Pin
Side Block-B onto the
P12
Bowling Pin Back Block using the
H5
Phillips Flat Head Screws as shown in
DETAIL A
.
DETAIL A
TO PLAY THIS GAME AND ACHIEVE A HIGH SKILL LEVEL
REQUIRES A SOFT AND GENTLE TOUCH.
OVER THROWING THE PUCKS WILL CAUSE DAMAGE TO
THE ENDS OF THE TABLE.
NOTICE :
