A-24 / ENGLISH
A-24
- FORM NO. 56041720 - 7730
OPERATING INSTRUCTIONS
FIGURE 39
THE NON-RECYCLING OR STANDARD SCRUBBING MODE
During the scrubbing process, detergent solution water from the solution tank (A) is fed to the solution line. There it is fed to the
fl
oor where
three disc scrubbing brushes (B) work to dislodge soil. After scrubbing, the dirty solution is vacuumed from the
fl
oor by the squeegee (C) and
discharged into the containment chamber in the forward portion of the recovery tank (D), where a system of baf
fl
es helps to clarify the solution.
Sensors in each tank will indicate, by lights on the control panel, when the water in the solution tank is too low or when the water in the recovery
tank is too high.
FIGURE 40
ESP OPERATING MODE
During the scrubbing process,
fi
ltered water from the solution tank (A) is fed to the solution line, where it combines with detergent. This mixture
is then fed to the
fl
oor where two or three disc scrubbing brushes (B) work to dislodge soil. After scrubbing, the dirty solution is vacuumed from
the
fl
oor by the squeegee (C) and discharged into the recovery tank (D). At intervals, a
fl
oat switch activates the recycling pump (E), which sends
fi
ltered solution from the recovery tank to the solution tank.
Summary of Contents for 56515851
