12 - FORM NO. 56041667
American-Lincoln Technology
7765 / 7760
HIGH
RECOVERY
LOW
SOLUTION
SCRUB
BRUSHES
SQUEEGEE
BLADE
BRUSH
PRESSURE
BRUSH
ROTATION
LOWER
RAISE
NORMAL
HEAVY
REVERSED
SCRUBBING
SQUEEGEE
BLADE LIFT
SCRUB BRUSH
LIFT
BRUSH
ROTATION
BRUSH
PRESSURE
RECOVERY HIGH
WARNING LIGHT
LOW SOLUTION
WARNING LIGHT
P-4854 FIGURE 6
OPERATIONS OF CONTROLS AND GAUGES
BRUSH ROTATION SWITCH
The Brush Rotation Switch is located on the console to the left of the steering wheel in the “SCRUBBING” section. This switch reverses
the rotation of the scrub brushes. This switch has two positions, “NORMAL” and “REVERSED”. This switch can not be activated unless
the Scrub Brush Lift Switch is in the “LOWER” position. The switch will light when activated.
BRUSH PRESSURE SWITCH
The Brush Pressure Switch is located on the console to the left of the steering wheel in the “SCRUBBING” section. This switch applies
additional downward pressure to the scrub brushes. This switch has two positions, “NORMAL” and “HEAVY”. This switch can not be
activated unless the Scrub Brush Lift Switch is in the “LOWER” position. The switch will light when the switch can be activated.
SQUEEGEE BLADE SWITCH
The Squeegee Blade Switch is located on the console to the left of the steering wheel in the “SCRUBBING” section. This switch in the
position marked “LOWER” will lower the squeegee and activate the squeegee vacuum. This switch in the “RAISE” position will stop the
squeegee vacuum and raise the squeegee. A switch activated by the forward-reverse foot pedal will automatically raise the squeegee if
it is in the lowered position and the machine is in reverse.
HIGH RECOVERY WARNING LIGHT
The High Recovery Warning Light is located on the console to the left of the steering wheel beside the
“SCRUBBING” section. The recovery warning light will illuminate approximately 5 minutes before the recovery tank is full, giving ample
time to complete the scrubbing cycle before the mechanical fl oat shuts off the vacuum to the recovery tank.
LOW SOLUTION WARNING LIGHT
The Low Solution Warning Light is located on the console to the left of the steering wheel beside the “SCRUBBING” section. The Solution
Warning Light will illuminate when the solution tank is empty, marking the end of the
scrubbing cycle.
