2
American-Lincoln Technology
SMART 2000 Electrical Troubleshooting Guide
ELECTRICAL SERVICE GUIDE
SMART 2000
CAUTION STATEMENT
As with all electrical equipment, caution is essential when doing electrical service. Remove all watches, rings
and jewelry before proceeding. Take care when doing power checks. Take time needed to place meter leads
correctly so as not to short to nearby terminals and/or electrical connections. Do not forget to disconnect power
at the battery when doing continuity checks or damage to your test meter may result. All Electrical service
should be done by a qualified technician experienced in DC voltage and DC testing equipment.
GENERAL STATEMENT
The following guide will present each electrical circuit separately, not including options, unless they are
in electrical series with the standard machine.
1.
"Power Off" means key switch is turned off.
2.
"Power Disconnect" means battery unplugged from the machine.
3.
All voltages are taken with the battery plugged in and the key switch on unless noted otherwise.
4.
All voltage readings are taken with the meter (-) lead connected to the battery (-) or the (-) side of the
condition meter unless otherwise specified.
5.
All continuity readings are taken with the key switch off or the battery disconnected.
