INSTALLATIONS
8
MB961 User’s Manual
Installing the Memory
The MB961 Series board supports four DDR3 memory socket for a
maximum total memory of 16GB in DDR3 DIMM memory type.
Installing and Removing Memory Modules
To install the DDR3 modules, locate the memory slot on the board and
perform the following steps:
1.
Hold the DDR3 module so that the key of the DDR3 module aligned
with that on the memory slot.
2.
Gently push the DDR3 module in an upright position until the clips of
the slot close to hold the DDR3 module in place when the DDR3
module touches the bottom of the slot.
3.
To remove the DDR3 module, press the clips with both hands.
DDR3 Module
Lock
Lock
Lock
Lock
Summary of Contents for MB961 Series
Page 4: ...iv MB961 User s Manual This page is intentionally left blank ...
Page 9: ...INTRODUCTION MB961 User s Manual 5 Board Dimensions ...
Page 20: ...INSTALLATIONS 16 MB961 User s Manual Connector Locations on MB961 Series ...
Page 32: ...INSTALLATIONS 28 MB961 User s Manual PCI3 PCI4 PCI Slot ...
