American Megatrends, Inc., Olympus III User’s Guide (Series 875)
88
Section 2
Advanced Setup,
Continued
Serial Port Number
Option Description
COM1
This setting allows you to use the serial port connector located at the rear of the Olympus III
motherboard. This is the default value.
COM2
This setting allows you to use the internal serial port connector located at J20 on the Olympus
III motherboard.
Serial Port Mode
You can use any mode you want. Just keep in mind that the bits per second, data bits,
parity, and stop bits must match your terminal setting.
Option Description
115200 8,n,1
This value allows the serial port to transfer data at 115200 bits per second using eight data bits,
no parity bit, and one stop bit.
57600 8,n,1
This value allows the serial port to transfer data at 57600 bits per second using eight data bits,
no parity bit, and one stop bit.
19200 8,n,1
This value allows the serial port to transfer data at 19200 bits per second using eight data bits,
no parity bit, and one stop bit. This is the default value.
Flow Control
Option Description
None
This value turns off data flow control (handshaking). Flow control is not used. This is the
default value.
Software
This value allows software handshaking to be used to control data flow.
Hardware
This value allows hardware handshaking to be used to control data flow.
Redirection After BIOS POST
Option Description
Disabled
This value turns off redirection after POST. This is the default value.
Boot Loader
This value turns on redirection during POST and during the time when the operating system is
booting.
Always
This value allows redirection to be on at all times. Some operating systems may not work if this
value is used.
Terminal Type
Option Description
ANSI
Use this value if your target terminal uses a standard US (United States) ANSI keyboard. This is
the default value.
VT-UTF8
Use this value if your target terminal uses VT-UTF8 combination keys.
Cont’d
Summary of Contents for Olympus III
