StorTrends® 3100 User’s Guide
10
Chassis Installation
Warning
This product shall only be accessed, assembled and serviced by technically qualified
personnel or technicians. To avoid personal injury and property damage, read all the
information provided in this guide. Carefully follow all the Safety Guidelines listed
before accessing or servicing the StorTrends 3100 Chassis or its components.
Safety Steps
Required Tools:
1.
Phillips Screw Driver
2.
Antistatic Strap (recommended)
For your convenience, some Safety Steps are also listed below:
Before accessing the chassis:
1.
Turn off all peripheral devices and turn off the power supply connected to the
chassis.
2.
Unplug all power cords from the system or the wall outlets.
3.
Disconnect all the cables and label the cables for easy identification.
4.
Use a grounded wrist strap designed to prevent static discharge when handling
components.
Removing the chassis covers:
After completing the steps above, you can remove the chassis covers and install
components and devices into the chassis as described in this chapter.
1.
Unlock and remove the screws and fasteners to remove the cover or components.
2.
Save all the screws and fasteners for later use. (If necessary, label these screws or
fasteners for easy identification.)
3.
Follow the instructions given in this chapter to remove the chassis covers.
