2
1
Introduction and Features
Intelligent Controller IC+ was designed by American Panel Corporation to control various walk‐in door devices and to monitor the
temperature of the walk‐in cabinet.
IC+ features:
Temperature Monitoring
Temperature Alarms
Panic Alarm (Optional)
Door Open Alarm
Door and Window Frame Heater Control
Electronically Controlled Light Switch and Automatic Light Off
HACCP Recording
Wi‐Fi Connectivity and Remote Notification
Intuitive User Interface
Battery Backup
Adaptive Settings
2
Temperature Monitoring
IC+ monitors the walk‐in cabinet temperature via a probe mounted in the warmest part of the cabinet which is near the door. The
alarm delay will ensure that the alarm does not go off during normal door openings.
For an accurate air temperature reading do not restrict the airflow over the temperature probe. To monitor the air temperature at a
different location an extended temperature probe is available for purchase.
If equipped with an extra temperature probe, IC+ will monitor the temperature at two locations or the temperature of two different
cabinets
One probe display
Two probes display
3
Temperature Alarms
If the temperature inside the walk‐in cabinet goes above the high alarm threshold or below the low alarm threshold, the
temperature reading on the display will blink indicating that the alarm time delay has been triggered. If the temperature does not
return to normal limits within the delay time, the buzzer will go off and the display will show the alarm message alternating with the
temperature reading. If IC+ is connected to the local Wi‐Fi network, it will send an alarm message via e‐mail.
High temperature alarm
Low temperature alarm
The buzzer can be silenced by pressing the alarm mute button.
The alarm’s set points and delay times are fully programmable to user’s needs.