XM745-V1.0-NR
12
——
Display the DMX-value, Reverse display, Shut off LED display
- Display the DMX 512 value of each channel
With this function you can display the DMX 512 value of each channel.
1. Select
"VALU"
by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
to confirm; the display shows
“D-00”
. In this setting, the DMX-adjustment of
every channel
will be displayed.
3.
Press
[UP]
or
[DOWN]
button in order to select the desired channel. If you select
“D-00”
the
display will only
show the DMX-value of the xx
th
channel.
4. Press
[ENTER]
to confirm or Press
[MENU]
to return to the main menu.
5. The display shows
"D- XX”
, ”X” stands for the DMX-value of the selected channel.
- Reverse display
Keyboard shortcuts
：
press down the "MENU" and the "UP" button at the same time
，
the
words showed on the digital display of the control panel can overturn 180
°
, also can use the
following instructions below to enter the Menu to configure the settings.
1.
Select
"FLIP"
by pressing
[UP]
or
[DOWN]
button.
2.
Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
3.
Press
[UP]
to select
“ON”
if you wish to enable this function or press
[DOWN]
button to
“OFF”
if you don’t; the display will rotate by 180°.
4. Press
[ENTER]
to confirm or Press
[MENU]
to return to the main menu.
- Shut off LED display
With this function you can shut off the LED display after 2 minutes.
1. Select
"D ON"
by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
3. Press
[UP]
to select
“ON”
if you wish to enable this function or press
[DOWN]
button to
“OFF”
if you don’t.
4. Press
[ENTER]
to confirm or Press
[MENU]
to return to the main menu.
——
locked keys the display
With this function you can activate the automatic keylock status. If this function is activated, the
keys will be locked automatically after exiting the edit mode for 15 seconds. keeping press the
[MENU]
key for 3seconds if you do not need this function.
1. Tap the
[UP]
button until
“LOCK”
is displayed and tap the
[ENTER]
button.
2. Press the
[UP]
button to select
“ON”
to activate this function, or
“OFF”
to deactivate this
function. Press
[ENTER]
to confirm.
3. Press
[MENU]
to return to the main menu.
——
Main menu
