XM745-V1.0-NR
13
1. Press
[MENU]
to enter the main menu (display flashing).
2. Press
[UP]
or
[DOWN]
button. to select
“SET”
.
——
“CHAN”
DMX channel MODE
With this function you can choose DMX channel Mode
1. Select “CHAN” by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows“4CH”
,
“5CH”
,
“6CH”
,
“8CH”
,
“36CH”.
3. Press
[UP]
or
[DOWN]
button to select“4CH”
,
“5CH”
,
“6CH”
,
“8CH”
,
“36CH”, the default
is “4CH”.
4. Press
[ENTER
] to confirm or Press
[MENU]
to return to the main menu.
-Automatic Run by no DMX
With this function you can automatic run the device by no DMX.
1. Select “FAIL” by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows “OFF”, “HOLD” or “AUTO”.
3. Press
[UP]
or
[DOWN]
button to select “OFF”, “HOLD” or “AUTO”, the default is “HOLD”.
4. Press
[ENTER
] to confirm or Press
[MENU]
to return to the main menu.
- Restore factory settings
With this function you can restore the factory settings of the device. All settings will be set back to
the default values (shaded). Any edited scenes will be lost.
1. Select
“DFSE”
by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
3. Press
[UP]
to select
“ON”
if you wish to enable this function or press
[DOWN]
button to
“OFF”
if you don’t.
4. Press
[ENTER]
to confirm or Press
[MENU]
to return to the main menu.
——
Power on to preserve the MANL settings
With this function you can activate. The fixture will return to the scene manual set
before automatically after re-power on.
1. Tap the
[UP]
button until
“POHO”
is displayed and tap the
[ENTER]
button.
2. Press the
[UP]
button to select
“ON”
to activate this function, or
“OFF”
to deactivate this
function. Press
[ENTER]
to confirm.
3. Press
[MENU]
to return to the main menu.
- Software version
With this function you can display the software version of the device.
1. Select
“VER”
by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, The display will show “V-XX”, "XX" stands for the version number, such as
the display may also show,"V-1.0"~"V-9.9"etc.
3. Press
[ENTER]
to confirm or Press
[MENU]
to return to the main menu.
——Manual adjust intensity
With this function you can Manual adjust intensity
1. Select “MANL” by pressing
[UP]
or
[DOWN]
button.
2. Press
[ENTER]
, the display shows
“STRB”,
··· ····
.
3. Press
[UP]
or
[DOWN]
button to select
“STRB”,
··· ····
.
4. Press
[ENTER
] to confirm or Press
[MENU]
to return to the main menu.