XM907-V2.2.0-A
12
The main menu is accessed by pressing the
-button until the display starts flashing.
Browse through the menu by pressing the
-button ,
-button ,
-button or
-button. Press the Enter-button in order to select the desired menu. You can change the
selection by pressing the the
-button ,
-button ,
-button or
-button.
Confirm every selection by pressing the
-button. You can leave every mode by pressing the
-button. The functions provided are described in the following sections. it will exit from
flash 10 seconds after the last keypress. Press this key under edit mode, . The functions provided
are described in the following sections.
To access the display menu via the internal battery, press the DC switch button for
2seconds; To shut off the display immediately, choose the commend " Reset All" menu and
press "Enter" button, otherwise, the display will automatically switch off about 1
minute from last button press.
Fu
n
ct
io
n
Set Dmx Address
Dmx Value
Slave Mode
Auto Program
Sound Control
A001~AXXX
PAN……
Slave1,Slave2,Slave3
Master / Alone
Master / Alone
DMX address setting
DMX value display
Slave setting
Auto program
Music control
In
fo
rm
at
io
n
Time Information
Current Time
Total Run Time
Last Run Time
Lamp Hours
Lamp Off Time
LastRun Password
Clean Last Run
LampTime Password
Clean Lamp Time
XXXX(Hours)
XXXX(Hours)
XXXX(Hours)
XXXX(Hours)
XXXX(Minute)
Password=XXX
ON/OFF
Password=XXX
ON/OFF
Power on running time
Fixture running time
Fixture Last times clear
Lamp running time
Lamp off time
Timer Password
038
Clear Fixture Last time
Lamp Password =”038”
Clear lamp time
Temperature Info
Head Temperature
XXX
℃
/
℉
Temperature in the head
Software Version
Ver x.x……
Software version
La
m
p
C
o
n
tr
o
l
Lamp On/Off
Automatic On
Lamp On via DMX
Lamp Off via DMX
Max On at Temp.
Lamp Off Temp.
ON/OFF
ON/OFF
ON/OFF
ON/OFF
20~79
℃
,45
℃
/68~174
℉
113
℉
80~139
℃
, 130
℃
/176~282
℉
, 266
℉
Lamp on/off
Lamp on/off Power on
Lamp on via DMX
Lamp off via DMX
Lamp restart at temp.
Lamp off at temp.
