(6) 12-Gallon, 500 PSI Carpet Extractor
12-Gallon, 500 PSI Carpet Extractor (11)
4.0 Shutdown Procedures
• When finished cleaning, turn OFF all
switches.
•
Disconnect the solution hose and vacuum
hose from the cleaning tool. Pull the valve
trigger to release pressure from the hose
before disconnecting the solution hose from
the cleaning tool.
• Disconnect the clear view in-line filter from
the vacuum hoses and clean the filter as
needed.
•
Disconnect the vacuum hose and solution
hose from the machine.
•
If water remains in the solution tank, use
the short vacuum hose and vacuum the
excess water from the tank (image 1).
•
Disconnect the power cords from the outlets
and from the machine.
• Remove the float assembly from the
recovery tank and clean filter as needed.
Replace float assembly and tank lid
(image 2).
•
Drain any remaining water from the recovery
tank and dispose of in a sanitary drain. DO
NOT use the same bucket to drain the tank
that you used to fill the tank (image 3).
•
Roll up all hoses and tools. Collect and store
extractor, all tools and accessories.
8.0 Machine Schematic Drawing
