background image

CADET ELITE™ 6’ x 36”

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

© 2003 American Standard Inc.

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE
INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

OPTIONAL 3 WALL TILING BEAD. KIT  No. TILE-BEAD AND APRON No.6FTE-APRON AVAILABLE AND MUST BE
ORDERED SEPARATELY.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT:

Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided
leaflet.

  72 x 35-3/4 x 19-3/4 In.

(1829mm x 908 mm x 502mm)

101 Lbs. (45 Kg.)

751 Lbs. (341 Kg)

78 Gal. (295 L.)
64 Gal. (242 L.)

23 x 49 In. (584 mm x 1245 mm)

65 x 29 In. (1651 x 737 mm)

13-1/2 In. (343mm)

40 Lbs./Sq. Ft. (190 Kgs/Sq. m.)

23.8
48.3

GENERAL SPECIFICATIONS FOR 2773E WHIRLPOOL

INSTALLED SIZE

WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
MIN. OPERATING GAL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT

3

)

WHIRLPOOL ELECTRICAL SPECIFICATIONS

2.1 HP, 14.4 AMPS, 120V.

PUMP

RECOMMENDED FITTING LOCATION

64 X 330mm (2-1/2 x 13")

FOR PIER OR ISLAND

INSTALLATIONS ONLY

ALT. FITTING

LOCATION #1

1829 mm

(72)

908 mm

(35-3/4)

OUTLINE OF CUTOUT 
1791 mm x 870 mm
(70-1/2 X 34-1/4)

454 mm

(17-7/8)

464 mm

(18-1/4)

38 mm

(1-1/2)

502 mm

(19-3/4)

1-1/2 O.D.TAILPIECE

■ 

LEVELING STRINGER

NOT FOR SUPPORT 

ROUGH

FLOOR

229mm

(9)

305 mm

(12)

57mm

(2-1/4)

(8) JETS

70mm

(2-3/4)

CUTOUT IN FLOOR
FOR DRAIN

PUMP

FINISHED

WALL

305mm

(12)

OPTIONAL TO 

FINISHED FLOOR 

USUALLY BETWEEN

1651 & 1981mm 

(65 & 78)

C/L OF
OVERFLOW

102 mm

(4)

C/L OF
SPOUT

C/L OF
VALVES

C/L OF
SHOWER ARM

70 mm

(2-3/4)

 117 mm

(4-5/8)

1-1/2 N.P.T.M.

THREADS

19 mm

(3/4)

229 mm

(9)

C/L OF

SUPPLIES

C/L OF DRAIN

SEE FITTING

SPECS FOR

DIMENSIONS

(2) AIR VALVES

ON/OFF
SWITCH

PROVIDE ACCESS TO PUMP FOR

SERVICING ON ALL INSTALLATIONS

INTEGRAL

SUPPORT

FEET

IN-LINE HEATER
REMOVABLE
BLANK

Reviews: