background image

HD-2

© 2007  American Standard Inc.

LIFETIME™ CORNER

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

Revised 7/07 

7"

(178mm)

76-3/4"

(1949mm)

54-1/2"

(1384mm)

65-3/8"

(1661mm)

 3"

(76mm)

 7"

(178mm)

15"

(381mm)

8"

(203mm)

17-3/4"

(451mm)

19-1/2"(C)

(495mm)

65-3/8"

(1661mm)

18"(A)

(457mm)

10"

(254mm)

13-3/4"

(349mm)

CUT OUT IN FLOOR

FOR DRAIN

21-1/2"(H)

(546mm)

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE 

OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

 

C/L OF

OVERFLOW

OUTLINE OF
CUTOUT

INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)

GENERAL SPECIFICATIONS FOR 6060L WHIRLPOOL

WHIRLPOOL ELECTRICAL SPECIFICATIONS

PUMP 

76-3/4 x 65-3/8 x 21-1/2 In. (1949 x 1661 x 546mm)

108 Lbs. (49 Kg.)

824 Lbs. (374 Kg.)

86 Gal. (325 L)
71 Gal. (269 L)

48 x 26-1/2 In. (1219 x 673mm)

63 x 50 In. (1600 x 1270mm)

15 In. (381mm)

24 Lbs./Sq.Ft. (116 Kgs./Sq.m)

  2.1 HP, 14.4 AMPS,120V.

E-Z INSTALL WHIRLPOOL HEATER 

12.0 AMPS,120V.

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUPPORT OF 

BATH BY INTEGRAL FEET.  NO ADDITIONAL SUPPORT REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

■ 

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

OPTIONAL 2-WALL TILING BEAD KIT No.TILE-BEAD MUST BE ORDERED SEPARATELY.

▲ 

CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX.  MAY BE REQUESTED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

FITTINGS NOT INCLUDED, MUST BE ORDERED SEPARATELY.

IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES:  CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM 

PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION.  MOUNTING HOLES DRILLED BY INSTALLER.

IMPORTANT:  Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

Reviews: