INSTALL HINGES AND SIDE MIRRORS
M968408D
"
INSTALL GLASS SHELF
#
Figure A: Medicine cabinet and side mounting plates installed.
Figure B: Install ESCUTCHEON (1a) and HINGE (2a) onto bottom MOUNTING
PLATE (3a). Secure with MOUNTING SCREW (4). Do not fully tighten at this time.
Figure C: Insert HINGE (2b) into top hinge hole of MIRROR (5). Place
ESCUTCHEON (1b) onto upper MOUNTING PLATE (3b). Tape in place if necessary.
Figure D: Hold MIRROR (5) with HINGE (2b) and install MIRROR (5) onto bottom
HINGE (2a). Install upper HINGE (2b) into ESCUTCHEON (1b).
Figure E: Secure upper hinge assembly with MOUNTING SCREW (4). The gap
between the cabinet mirror and side mirror should be equal at the top and
bottom. Align if necessary. Tighten both top and bottom MOUNTING SCREWS (4)
to secure installation. Press in INDEX BUTTONS (6).
Repeat the above steps to install the opposite end mirror.
1a
3a
3b
1b
1b
1
2
2a
2b
2b
2a
5
4
Figure B
Figure C
Figure D
Figure E
Figure A
5
6
6
4
Determine the desired location of the two GLASS SHELF UNITS (1).
Insert four SHELF PINS (2) two on each side into the side holes.
Rest GLASS SHELF (1) onto SHELF PINS (2).
