INSTALLATION INSTRUCTIONS
T H A N K Y O U . . . for selecting an American Standard . . . the benchmark of fine quality for over 100
years. To ensure that your installation proceeds smoothly--please read these instructions carefully
before you begin. All you need to finish the installation are your selected fittings. (Certain installations
may require professional help.) Also be sure your installation conforms to local codes.
GENERAL INSTALLATION INFORMATION
Carefully uncrate and inspect your new bath for any
shipping damage. If such damage is found, report it to
your vendor immediately.
Protect all finished surfaces of the bath during
construction and installation using a drop cloth. If
packaging foam is removed for inspection purposes,
save for foot installation procedure.
Fittings (bath filler, drain, feet, and water supplies) are
not provided with the bath and must be ordered
separately.
752515-100 Rev. D
© American Standard Inc. 2002
All product names listed herein are trademarks
of American Standard Inc. unless otherwise noted.
HIGH GLOSS ACRYLIC
FITTINGS NOT INCLUDED
List of Required Components (not included):
• 1591.170 Drain*
• 9112.017 Bath Filler*
• 9114.012 Water Supplies*
• 9111.039 Ball & Claw Feet
• 9110.039 Reminiscence Feet
* Available at your American Standard Distributor
List of Required Tools and Supplies:
Tools
• Drill
• Drill bits for wood
or tile
• Level
• Tape Measure
• Pipe Wrench
• Crescent Wrench
• Slip Joint Pliers
• Screw Driver
• Standard
Woodworking Tools
• Personal Safety
Equipment
• Caulking Gun
Supplies
• Putty
• Caulking (silicone)
• 1/4" - 20 x 3"
toggle bolts
• flat washers
(as required)
• 1/4" lockwasher (4)
• 1/4" nut (4)
• Masonry Anchor
(concrete installations)
• 5/16" Lag Bolts
(wood floor installations)
FOR AFTER-SALES SERVICE CALL 1 (800) 223-0068 WEEKDAYS.
INSTALLER: PLEASE LEAVE THESE INSTRUCTIONS
WITH HOMEOWNER AS THEY PROVIDE IMPORTANT
CLEANING INFORMATION.
Fig. 1
72-1/8 x 37-1/2 x 27-1/4 In.
(1832mm x 953 mm x 692mm)
130 Lbs. (59 Kg.)
413 Lbs. (186 Kg.)
34 Gal. (129 L)
18 x 42 In. (457mm x 1067mm)
67 x 31 In. (1702 x 787mm)
14 In. (356 mm)
22 LBS./Sq. Ft. (107 Kgs/Sq. m. )
23.8
48.3
GENERAL SPECIFICATIONS FOR 2908 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
953mm
(37-1/2)
*
724mm
(28-1/2)
114mm
(4-1/2)
140mm
(5-1/2)
127mm
(5)
89mm
(3-1/2)
TYP.
343mm
(13-1/2)
57mm
(2-1/4)
C/L OF 1/2 NPT
SUPPLIES
C/L OF
DRAIN
FINISHED WALL
FINISHED
FLOOR
REMINISCENCE
FOOT
1-3/8 O.D.
TAILPIECE
C/L OF
OVERFLOW
38mm
(1-1.2)
REMINISCENCE
BALL &
CLAW FOOT
1832mm
(72-1/8)
464mm
(18-1/4)
REF.
870mm
(34-1/4)
REF.
692mm
(27-1/4)
584mm
(23)
OUTLINE OF
SKID RESISTANT
SURFACE
H
C
C/L
368mm
(14-1/2)
203mm
(8)
508mm (20)
699mm
(27-1/2)
108mm
(4-1/4)
114mm
(4-1/2)
324mm
(12-3/4)
FINISHED WALL
1/2 N.P.T. INLETS
WALL FLANGES
W/SCREWS
PROVIDE CROSS
BRACING IN WALL
FOR ANCHORS
