background image

ranGEFIndEr rEtICLE

8x36RF has a built-in step rangefinder with a mils 

scale for distance, angle and height detection.

dIStance

If  the  height  of  a 

viewed  object  is 

known, use the fol-

l o w i n g  e q u a t i o n 

substituting height 

of  object  for  vari-

able H:
L = H/MILS x 1000 

anGLe

To  c al c ulate  the 

included angle of a 

viewed object, use the following formula:
x° = 0.06 x MILS 

HeIGHt

If the distance to a viewed object is known, use 

the following equation substituting distance to 

object for variable L:
H = L x MILS/1000

2M tarGet BaSed ScaLe

A 2m target fits between the numbered baseline 

and the main horizontal line. If the 2m target fits 

between the 4 and the right horizontal post of the 

main line the target is 400 m away. If the same 

target fits between the 7 and the right post of main 

line the target is 700 m away. 

CarE and CLEanInG

By following these simple guidelines, your 

binocular will provide optimal performance for 

many years:
1. Keep binocular lenses clean and free of 

moisture and dirt.
2. When not in use, do not expose your binocu-

lars to direct sunlight for long periods of time 

(e.g. on the dashboard of your vehicle).
3. Store your binocular in a cool, dry place. 

Always store your binocular in its carrying 

case, with the rubber roll-down eyecups in the 

“up” position.
4.  Binoculars  are  precision  instruments  - 

handle them with care. Do not drop, shake, 

bump or rattle your binocular. Its precision 

optics can become misaligned (out of collima-

tion) as a result of rough treatment, which can 

render the instrument virtually unusable.
Collimation problems usually require repair by 

a trained technician, and are generally not cov-

ered by the Warranty.
To clean your binocular, follow these simple 

steps:
1. Before attempting to clean any of the lenses, 

carefully remove all grit, sand, dirt, dust, or 

other substances which may scratch the sur-

face of the optics. Avoid touching lens surfaces 

with fingers or coarse materials. Use a soft lens 

brush, lens cleaning tissue, a lint-free cotton 

cloth, a clean cotton swab, or “canned” air.
2. For materials that remain on the lenses, use 

a liquid substance designed to remove grease 

(e.g., commercial lens cleaner, household 

window cleaner or rubbing alcohol). 
CAUTION: Do not apply liquid directly onto a 

lens, which may result in the liquid seeping into 

the barrel of the binocular. Apply the solution 

onto a cloth or swab, and use the cloth or swab 

to remove the foreign substance with circular 

motions. Take care as to not rub away antire-

flectant lens coatings. Use a light touch.

If a 2m target fits 

between these two 

lines then the target 

is 400m away.

If a 2m target fits 

between these two 

lines then the target is 

700m away.

L

L - Distance from object
H - Height of object
x° - Included angel

H

Summary of Contents for ATN 8x36RF

Page 1: ...tate or the US BIS Department of Commerce It is unlawful and strictly prohibited to export or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person whether abroad or in the United States for which a license or written approval of the U S Government is required without first obtaining the required license or written approval from...

Page 2: ...s Eye Adjustments How to adjust for dis tance between your eyes The distance between the eyes called inter pupillary distance varies from person to person To achieve perfect alignment of lens to eye follow these simple steps 1 Hold your binoculars in the normal viewing position 2 Grasp each barrel firmly Move the barrels closer together or farther apart until you see a single circular field Always...

Page 3: ...up position 4 Binoculars are precision instruments handle them with care Do not drop shake bump or rattle your binocular Its precision optics can become misaligned out of collima tion as a result of rough treatment which can render the instrument virtually unusable Collimation problems usually require repair by a trained technician and are generally not cov ered by the Warranty To clean your binoc...

Page 4: ...of legal entity outside ATN and the Customer ATN s obligations under this Agreement extend solely to the Customer ATN s liability hereunder for dam ages regardless of the form or action shall not exceed the fees or other charges paid to ATN by the customer or customer s dealer ATN shall not in any event be liable for special indirect inciden tal or consequential damages including but not limited t...

Reviews: