Americana Outdoors, Inc.
7
Cherokee Installation Guide
NOTE: All required concrete work must be
completed and anchor bolts set prior to beginning
this installation. (surface mounted units only)
STEP 1
Layout all posts
(A)
and rafters
(B)
. Attach using (4)
1/2”
hex bolts
(CC)
and
1/2”
hex nuts
(DD)
at each
assembly.
STEP 2
Stand up the post/rafter assembly and set into
footing holes. Set to the required elevation as
shown on the provided drawings, then plumb and
brace. Fill footing with concrete and allow to
completely harden before continuing installation.
If installing posts surface mounted, set post/rafter
assembly over anchor bolts. Attach the anchor bolt
nuts and washers, but DO NOT completely tighten
at this time.
1
2
