5
Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
NOTE:
The initial 15 minutes
of use may result
in minimal smell
and smoke. This is
normal and harmless
and comes from the
protective substance
applied to the heating
elements during
manufacturing.
HOW TO USE
USING THE TOASTER OVEN
Before First Use of Toaster Oven:
1. Make sure the Timer Control Knob is set to “0” position
before plugging the power cord into a wall outlet.
2. Set the Timer Control Knob to pre-heat the oven for
15-min using mode 1 (griddle and oven working together)
until the smoke and odor no longer persist.
3. Turn the Timer Control Knob to the “0” position and
remove the power cord from the wall outlet.
Using the Timer Control Knob:
1. In order for the toaster oven to turn on, the Timer Control
Knob must be set.
2. Turn the Timer Control Knob clockwise to select the
desired time. (Maximum time 15-minutes)
3. Once the desired time frame has expired, the timer bell
will ring loudly and the oven will turn OFF automatically.
4. If you wish to shut the timer off earlier than the
programmed time, you can manually turn it off by turning
the Timer Control Knob counter clockwise to the “0”
position.
Using the Toaster Oven:
1. When using the broiler tray, preheat the oven for
2-minutes.
2. When toasting, place the food directly onto the baking
rack.
3. Always keep the door closed when the oven is in use.
4. The oven can be used to defrost or heat up frozen foods.
The time will depend on the size and the temperature of
the food.
5. To ensure uniform defrosting, divide the food into smaller
portions if possible and wrap in aluminum foil.
OPERATING CONTROLS:
MODE 1
GRIDDLE & OVEN
MODE 2
GRIDDLE ONLY
MODE 3
OVEN ONLY
USING THE BREAKFAST GRIDDLE
1. Make sure the timer is set to 0 position before plugging
the power cord into a wall outlet.
2. Position the Oven-Top Griddle on top of the oven.
3. Set the Timer Control Knob to desired time.
4. Set mode selector to Mode 2.
5. When cooking is complete, set the Timer Control Knob to
the 0 position before unplugging.
5