Americana Outdoors, Inc.
19
Navajo Installation Guide
STEP 10
Position gutter
(F)
over the bottom end of roof
panels
(G)
. The inside of gutter
(F)
should be as
close as possible to the angle
-
cut end of ridge cap
(E)
. For proper fit, stagger the gutters around the
shelter as shown below.
With gutter
(F)
held in position, attach the bottom
and top lips to roof panels
(G)
at
8”
on center using
#8 x
1/2”
screws
(AA)
.
Repeat to install all gutters
(F)
.
If installing standing seam panels, go to Step S4
on page 18 if gutter straps are required.
Otherwise, continue with Step 11
OPTIONAL
-
Gutter Splice
Complete this step only if gutter
(F)
is in two or
more pieces.
Apply a generous amount of caulk to the back and
bottom of gutter splice
(M)
to prevent leaks. Insert
an equal amount of the splice into the ends of the
gutters
(F)
.
Attach gutter
(F)
to gutter splice
(M)
using (4) #8 x
1/2”
screws
(AA)
.
10
PLAN VIEW
Overlap smallest panels and
attach at corner using screw (AA)
