Initial Start-Up
Install the App and Pair-Up
Download and install the app in your device which supports
Bluetooth 4.0 technology.
Turn on Bluetooth and the App. Make sure both are ON when
pair-up is proceeding.
When the OLED is on, press and hold the button on the pedometer
about 6 seconds to start pair-up.
Symbol
and symbol
will be shown on the
OLED alternatively, indicating pair-up is
proceeding.
If SUCCEED, symbol “ Success!” will be shown on the
Success!
OLED.
If FAIL, symbol “Fail!” will be shown on the OLED.
Fail!
The measuring data will be transmitted to your device which
supports Bluetooth 4.0 technology when the pair-up is successful.
6
TransHealth App available on
Apple App Store and Google Play Store.
Recommended App
Initial Start-Up
How to Wear the Pedometer
1. For first wear, use the tape measurement to measure your wrist.
2. Pull the wristband out of the metal buckle.
3. Select the suitable length of the wristband and cut off it .
4. Use the metal buckle to buckle up the wristband or adjust its
length.
5. For daily wear, insert the wristband which has the USB icon into
the USB interface of the device.
6. Wear the pedometer just like wearing a watch. Remember
the wristband which has USB icon on it must face to you.
7. Connect the other side of the wristband with the device.
8. Then you can start your measurement.
3
4
0
1
CAUTION
Note: If you wear the pedometer on the left hand, the button on
the pedometer must be towards to your arm. If you wear it on the
right hand, the button on the pedometer must be towards to the
fingertip.
7
Up
7
