Plumbing The Bath In
Again we recommend that the bath be fully installed by a
professional/qualified tradesman.
Because the waste is already fitted to your bath the next step is to
connect it to you outlet pipe and secure it to the floor.
A 1 ½”adaptor should be with the bath, this is shown below.
Screw the 1 ½” adaptor onto the end of the waste thread ensuring a
tight fit. Make sure the rubber seal is in the adaptor, shown below.
1 ½” Adaptor
screwed onto
waste underneath
the bath
Rubber
seal inside
adaptor
The position of the bath should have been finalised and the outlet pipe
work should be on place. Once the adaptor has been fitted, with the
use of a compression fitting, slide the bath pipe work down onto the
compression fitting.
