5 //
24
P/N: 630-00047 RevB 11519
Hercules II 600 Vertical Platform Lift Install Manual | www.Ameriglide.com | 866-378-6648
SAFETY
READ ALL INSTRUCTIONS IN THIS MANUAL BEFORE INSTALLING / OPERATING THE LIFT.
•
Always wear eye protection while installing or servicing this product.
•
Always disconnect this product from the electrical source before servicing it.
•
Do not wear loose clothing or jewelry when working on this product.
•
Do not disable any safety equipment or switches supplied with this lift.
•
Stay away from all drive train components while the lift is operating.
•
Do not exceed the maximum payload capacity of 600lb.
•
Do not ride on the lift until it is anchored in place.
•
This product is designed only for lifting people and mobility devices. Do not use for
any other purpose.
This lift is designed to meet ASME A18.1 section 5 and CSA B44.1/ASME A17.5 with the
addition of certain options. Code requirements for vertical platform lifts vary depending
on location. Installers are responsible for contacting their local, state or county code
enforcement office to determine all applicable regulations prior to installing vertical
platform lifts.
SITE REQUIREMENTS
•
The lift requires a 120VAC 15AMP grounded circuit.
•
Outdoor installations require a GFI protected circuit.
•
Only install the lift on a 4
"
thick, level 3,500PSI reinforced concrete slab.
•
Footprint requires 50
"
x 64
"
area (this includes the folding access ramp.)
•
Lift must meet NFPA 70 (NEC) National Electrical Code adopted in area of installation
INDICATIONS OF USE: THE VERTICAL PLATFORM LIFT SERIES IS USED TO ASSIST
TRANSFER OF PATIENTS OR MOBILITY IMPAIRED PERSONS, UP AND DOWN BETWEEN
LEVELS OF A RESIDENTIAL HOME.
Summary of Contents for AMGHERC600-4
Page 24: ...P N 630 00047 RevB 11519 ...
