22
Advanced Operations
A. If the ER Is Not Connected to
an Answering Machine
or Voice Mail Service
1. Dial as you would a regular
phone call. The ER will answer
after
10
rings.
2. You will hear a voice message
saying, “Please enter your
Monitor Access Code”.
3. Enter the Monitor Access Code
on your keypad (The access
code is 123 unless it has been
changed). This turns on the
speakerphone of the
ER and allows you to listen in
and have a two -way
conversation.
4. Every 60 seconds, you will be
asked to press any key on the
keypad to continue; otherwise
the ER will hang up.
B. If the ER Is Connected to an
Answering Machine
1. Dial as in a regular phone
call. As the answering machine
starts playing its outgoing
message, listen for the ER to
beep.
2. When the ER beeps, press any
key on your keypad and hold
it down for at least
3
seconds.
(If you don’t hold the key down
long enough, the answering
machine will continue its
regular recording procedures
and the ER
will not be
activated.)
3. You will hear a voice message
saying, ”Please enter your
Monitor Code”.
4. Enter the Monitor Access Code
on your keypad (the access
code is 123 unless it has been
changed). This turns on the
speakerphone of the ER and
allows you to listen in and
have a two-way conversation.
Summary of Contents for ER Telephone
Page 34: ...E N G L I S H 31...
Page 39: ......
Page 40: ...F R A N A I S Mode d emploi ER T l phone d urgence...
Page 74: ...71 F R A N A I S...
