background image

IMPORTANT INSTRUCTIONS

19

Warranty

This warranty applies only to
Ameriphone products that are 
purchased and used in the United
States or Canada.

Ameriphone warrants the XL-40
Amplified Telephone against any
defect in materials or workmanship
for the period of one year from the
date of purchase.

If your Ameriphone product is
defective and returned within 30
days of the date of purchase, your
Ameriphone dealer will replace it
at no charge.

If returned after 30 days but within
one year from the date of 
purchase, we will repair or replace
it at no charge. In the repair of
your XL-40 Amplified Telephone,
we may use new or reconditioned
replacement parts. If we elect to
replace your XL-40 Amplified
Telephone, we may replace it with
a new or reconditioned product of
the same or similar design. Repair
or replacement will be warranted
for either 90 days or the 
remaining time on the original

warranty period, whichever is
longer. 

Implied warranties, including
those of fitness for a particular
purpose and merchantability (an
unwritten warranty that the 
product is fit for ordinary use), are
limited to one year from date of
purchase. We will not pay for loss
of time, inconvenience, loss of use
of your XL-40 Amplified
Telephone, or property damage
caused by your XL-40 Amplified
Telephone or its failure to work, or
any other incidental or 
consequential damages. Some
states do not allow limitations on
how long an implied warranty
lasts or the exclusion of incidental
or consequential damages, so the
above exclusions or limitations may
not apply to you. To get warranty
service for your XL-40 Amplified
Telephone, you must provide proof
of the purchase date. Within 30
days of the date of purchase,
return your XL-40 Amplified
Telephone to the place where you
purchased it for immediate
replacement. After 30 days, call

Summary of Contents for XL-40




























Reviews: