background image

Owner's Record 

(Keep this portion for your records)

Product Name

Purchased From

Purchase Date

Model Number

Cut here

 Product Registration

  

or register online at www.treestandcustomerservice.com

Product Purchased

Name

Street Address

City

Day Phone

Owner's Age 

(Optional)

Date Purchased

Sex 

(Optional)

M

F

State

Evening Phone

Model #

Zip

Price $

Purchased from
(include store# from receipt)

Keep the top portion for your records

Signature: ______________________________________ Date: _____________________

How many days a year do you hunt from your treestand?_____

Are you a Bow Hunter?

Gun Hunter?

Do you hunt on Public Land?

or Private Land?

You must complete and return the registration card below within thirty (30) days 

of the date of purchase in order to activate limited warranty coverage.

I have read and fully understand all warnings and instructions contained with this product.
I also agree to always wear a Treestand Manufacturer’s Association (TMA) Certified Full Body Harness everytime I use this product.

You must complete and return the registration card below within thirty (30) days 

of the date of purchase in order to activate limited warranty coverage.  
Registration is also used for important product notifications.  Your 
information will never be shared or sold to any third parties .

For customer service you may do one of the following: 
 

- Visit www.treestandcustomerservice.com for replacement parts 

 

- E-mail info@treestandcustomerservice.com with comments/suggestions 

 

- Call (866)972-6168 and ask for Primal Vantage’s Customer Service for any 
assistance (M-F 9:30 a.m. - 4:30 p.m. Eastern)

For any missing or damaged parts claim, this card must be returned, completed on-line, 

or a proof of purchase (copy of receipt) must be mailed to 685 Route 10 East, 
Randolph, NJ 07869 within thirty (30) days of purchase.

Warning

: You 

MUST

 read all of the safety warnings, assembly and instructions 

carefully. By returning your registration card, you agree that you have read and 
fully understand  all the safety warnings, assembly and instructions of your 
product.

What type of accessories would you like to see on your treestand?____________________________

Summary of Contents for GRIZZLY 51016

















Reviews: