background image

Customer Service Department 1-866-972-6168 

 

 

 

            www.treestandcustomerservice.com

TREESTAND SAFETY WARNINGS

Please read the following instruction manual and warnings labels completely before utilizing this product. Failure to understand and execute the instructions 

and warnings may result in serious injury or death. In the event of an accident, have a plan for rescue, including the use of devices that may be easily reached 

while suspended.

ALWAYS 

read and understand all warnings and instructions and use all safety products provided before each use of this product. Failure to read and 

understand all warnings and instructions may result in serious injury or death. Contact a Customer Service Representative with any questions you may have.

NEVER

 exceed total weight limit of 

300 lbs

DO NOT

 use if your combined weight with all of your hunting gear and any accessories exceeds 

300 lbs. 

Use of 

tree stand over the weight limit may result in serious injury or death. 

DO NOT

 use this tree stand while under the influence of alcohol, medication or any illegal substances. Use of tree stand while under the influence of any of 

these substances may result in serious injury or death.

NEVER 

use this treestand during inclement weather. 

DO NOT

 use tree stand during thunderstorms, snowstorms, hurricanes, tornadoes or any other weather 

conditions that include (but not limited to) lightning, icy conditions, or high winds that could create slippery or dangerous situations. End your hunt and return to 

the ground if inclement weather conditions arise.

NEVER 

use treestand If you are feeling ill, nauseous, dizzy or if you have a prior condition that could cause a problem. i.e., heart condition, joints that lock-up 

spinal fusions, etc., or if you are not well rested and alert. Physical ailments can reduce your ability to safely install, utilize, and remove your treestand. Please 

consult a physician prior to use.

NEVER 

use this tree stand if you have a history of health problems such as (but not limited to) heart problems, back problems, high blood pressure, impaired 

vision, equilibrium impairments, are afraid of heights, have been advised by a doctor or physician not to climb. If you are not physically fit, well rested, and 

alert, or if you have any other physical or mental condition that would impair your ability to properly use this treestand. 

NEVER 

use this tree stand on a tree that is dead, leaning, diseased, loose barked or on a utility pole as the tree may fall, break, or uproot and may result in 

serious injury or death. 

NEVER 

rely on a branch for support.

NEVER 

jump or bounce on the treestand’s platform or ladder sections to seat it to the tree. 

Instead,

 

step firmly on the first rung of the bottom ladder section to 

set the ladder into the ground before proceeding to climb the ladder. 

NEVER 

transport any of your equipment with yourself while ascending or descending the tree. You will need to have two hands free during ascending and 

descending for safety. Use a haul line to pull up your firearm (unloaded, chamber opened with safety lock engaged, barrel facing towards the ground), bows, 

arrows, knives or any other equipment to your tree stand once you have reached your desired hunting height. 

ONLY 

pull up hunting equipment after the tree 

stand has been secured to the tree and after you and your harness have been secured to the tree. Prior to descending, lower your equipment on the opposite 

side of the tree from which you are climbing. Make sure that the unloaded firearm’s safety lock is engaged and the gun barrel is pointing towards the ground. 

ALWAYS 

hunt with a plan and a buddy. Before you leave home, let others know your exact location, when you plan to return and who is with you.

ALWAYS 

carry emergency signal devices such as a cell phone, walkie-talkie, whistle, signal flare, PLD (personal location device) and flashlight with you at all 

times and within reach even while you are suspended in your harness. Watch for changing weather conditions. In the event of an accident, remain calm and 

seek help immediately.

ALWAYS 

inspect the tree stand and the 

F

all 

A

rrest 

S

ystem (FAS) (Harness) for signs of wear or damage 

BEFORE 

each use. Also inspect to ensure that nuts 

and bolts are secure. Pay special attention to the harness and straps, guaranteeing that nothing has been frayed or severed. Destroy all products that cannot 

be repaired by the manufacturer. Contact a Customer Service Representative for replacement parts. The Fall Arrest System  

MUST 

be discarded and replaced 

after a fall has occurred.

NEVER 

modify your treestand in any way by making repairs, replacing parts, or altering adding or attaching anything to it except if explicitly authorized in 

writing by the manufacturer. Improper installation or adjustment may cause serious injury or death.  Remove all contents from box. Inspect for any damaged or 

missing parts. If any parts are missing or damaged, you must only use certified replacement parts. Using any other replacement parts will 

void product warranty. 

THERE ARE NO EXTRA PARTS

. All parts 

MUST

 be used to ensure the safety of you and your stand. If you think parts are missing or 

damaged, 

STOP IMMEDIATELY

 and contact our Customer Service Department.  Using the tree stand with missing or damaged parts may result in serious 

injury or death. Contact a Customer Service Representative if you have any missing, damaged or extra parts.

PRACTICE

 installing, adjusting and using your treestand at ground level prior to using it at an elevated position.

ALWAYS

 keep instructions (written and video) in a safe place and review before each use. It is the responsibility of the treestand owner to furnish the complete 

instructions to anyone who borrows or purchases the treestand from you.

NEVER 

use this treestand for any use other than hunting. Our treestands are designed for hunter’s to wear a Full Body Harness. If you are not completely 

comfortable and confident with your ability to safely install, ascend, hunt and descend using a Full Body Safety Harness and this treestand, 

DO NOT 

PROCEED.

NEVER 

use this treestand for trimming trees.

NEVER 

fall asleep in your stand as you may fall out resulting in serious injury or death.

ALWAYS 

be sure to retighten all bolts 

BEFORE 

each new use of treestand.

ALWAYS 

have a minimum of three people present when installing or removing this treestand.

©2011 (rev 12/10)

Summary of Contents for GRIZZLY 51016

















Reviews: