PLATFORM ASSEMBLY
!
!
NOTE:
NOTE:
You will need:
!
!
IMPORTANT:
IMPORTANT:
Practice with your new product, wearing your entire hunting gear,
FULL BODY SAFETY HARNESS at ground level before ascending to any height.
!
!
IMPORTANT:
IMPORTANT:
Assemble YOUR LADDER STAND on Ground.
Step 1:
Slide SHORT UPPER LEGS through PLATFORM.
Do not insert bolts yet.
Step 2:
Insert top of UPPER LEGS into SEAT BASE.
Secure using (6) M8 x 50mm bolts, (2 bolts per leg).
Step 3:
Bolt UPPER LEGS to PLATFORM
using (3) M8 x 110mm bolts.
(6)
M8 x 50mm HEX BOLT
(2 Washers, 1 Lock-Nut)
(3)
M8 x 110mm HEX BOLT
(2 Washers, 1 Lock-Nut)
THE
13’ TRIPOD
Model #5413D / #51016
(3)
Upper Leg
(1)
Platform
(1)
Seat Base
Customer Service Department 1-866-972-6168
Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869
www.treestandcustomerservice.com
©2011 (rev 06/11)
