REPLACEMENT INSTRUCTIONS
LAB STORAGE TANKS
29
98-0123 Rev E
Hot wire to terminal 1
Neutral wire to terminal 2
Ground wire to terminal 3.
11.
Install resistivity cell wires into the terminal block in the following order:
White to terminal 7
Black to terminal 8
Shield to terminal 9
Red to terminal 10
Green to terminal 11
12.
Replace the rear access panel and close the electrical enclosure.
13.
Reinstall the line cord to the power source.
14.
Close the sample port on the post-filter, open all valves to the loop and return water to the
device.
Summary of Contents for 00HC-4090
