42
98-0157 Rev P
Figure 41
System operation to programmed times
is activated when TIMER is selected in the
OPERATION MENU screen.
Timed operation for the MediQA can be
set by programming pre-set times.
To change pre-set times, press the
highlighted blue boxes enter the time
(24-hour clock) on the pop up key pad
and press enter.
Enter a time of 00:00 to prevent
operation on any particular day.
ENTER under MEDIQA OPERATION MODE opens to the screen shown below and allows the user to
switch between recovery modes. HI RECOVERY MODE is the default and can be disabled by holding
the DISABLE button for two seconds. Must have level 3 access to change the mode of operation.
Figure 42
HI RECOVERY QUALITY defines the high
and low limits of permeate conductivity
that the water will maintain. The reject
water will recirculate to the tank until
the high limit of water quality is
reached, when the concentrate to drain
valve will open. The concentrate to drain
valve will close when the low limit is
reached.
BREAK TANK TEMPERATURE defines the
high and low limits of the temperature
that water will be maintained. The drain
valve is opened when the temperature
reaches the high limit and closes when
the low limit is reached.
Summary of Contents for 00MDP2-230
