23
98-0156 Rev G
Enter the
HOLD TIME
. This time
represents the time the distribution
loop is held at the entered sanitization
temperature. The minimum default
hold time can be found in Section 6.10.
Finally press
“MAIN MENU”
to go back
to the
MAIN MENU
.
Today Current Set-up menu
Screen Display
Action
As an option in this screen you can run
a
TODAY
program which gives you the
facility to run the program only for
TODAY
but will not affect the pre-set
parameters set for the
DAILY
DEFAULTS
. Press “
CURRENT SETUP
”.
Change parameters to suit.
NB:
The operating parameters for that
day will be automatically loaded into
TODAY
at midnight.
This screen can be accessed to view
without the need to log in. To edit will
require logging in as a Level 1 user or
above.
Once you have entered all the required parameters the system is
ready for automatic operation, further set up is not required.
During Heat disinfection other screens are available which monitor
the unit’s status and display any alarm conditions. See 6.4.5 to 6.5
for further details of these screens.
Summary of Contents for Heatsan 00HS208
