28
98-0156 Rev G
Factory set-up
This is the highest level of user access giving the operator full rights to
change factory default settings and clear alarm and event logs. This level
is password protected and should only be available to AmeriWater
technicians or an approved/authorized third party.
Screen Display
Action
To gain access as a Level 2 or 3 user,
press
“USER LOGIN”
and login as
detailed in 6.3.1. Enter the appropriate,
password, _ _ _ _ _ _ Then press
“ENTER”
. The password will only be
available to authorized personnel;
contact AmeriWater if this level of
access is required.
Once logged in press
“CURRENT SETUP”
then select
“SYSTEM SETUP”
this will
take you into the three system setup
screen menus as follows.
Refer to Section 6.10 for SYSTEM
SETUP PAGE 1 values.
Press
“NEXT PAGE”
to enter
SYSTEM
SETUP PAGE 2.
Summary of Contents for Heatsan 00HS208
