Page 9
For technical questions, please call 1-888-866-5797.
Item 64014
Sa
FE
ty
Op
E
ra
ti
O
n
Maint
E
nanc
E
S
E
tup
ncV (non-contact ac Voltage) Button
The
ncV
function allows you to use the Meter for voltage detection.
1. To activate, hold down the
ncV
Button in any mode.
2. Move the Meter close to the voltage
source or unshielded conductor. If
voltage is detected, the meter will
beep and the Non-Contact Voltage
Indicator will flash.
3. Release the
ncV
Button to
stop voltage detection.
WarninG! Even if no indication is
given, voltage may still be present.
Do not rely solely on NCV detection to
determine the presence of voltage.
auto power-Off Operation
If the Meter is not used for approximately 15 minutes, it automatically turns
itself off to conserve battery power. To turn the Meter back on after auto-
off, press any Button or turn the rotary switch. To disable Auto Power-Off,
press and hold down the
HOLD
Button when powering on the Meter.
