User Manual
© 2022 AMETEK Electronic Systems Protection / Technical Support: 1-800-645-9721 / espsurgex.com
3
II.
INSTALLATION INSTRUCTIONS
1. Next Gen PCS Installation
:
a. Turn off the machine you are connecting to the
Next Gen PCS Filter, and unplug the machi
ne’ s
power cord from wall outlet.
b. Connect Modem/Fax line: Connect a phone cord from the wall jack to the
“Modem/Fax” modular jack labeled “IN”, and then connect a second phone cord
from the
“Modem/Fax” modular jack labeled “OUT” to the machine/equipment to
be protected.
Please Note:
The Next Gen PCS Filter series only provides connectivity and protection for a
single phone line
– connecting the Filter to a phone jack with 2 lines using
4-conductor telephone cable may cause Filter malfunction, detailed in
Section:
“ Troubleshooting/Next Gen PCS Filter”.
c. Connect
“10/100/1000 ETHERNET” network line: Connect a CAT5e network
cable from the wall jack to the
“10/100/1000 ETHERNET” modular jack labeled
“IN”, and connect a second CAT5e network cable from the “10/100/1000
ETHERNET
” modular jack labeled “OUT” to the equipment to be protected.
One CAT5e network cable is included with the Next Gen PCS Filter.
