14
2017-08-11
125614
04
3.1.2
B Model version
The B version has the same functions as the A version, but it differs
as it is not necessary to include a measuring instrument to the set-up,
as the multi-scanner has built-in measuring capabilities.
Pos. Description
a + b Holding down a and b will reset the instrument.
c
ANALOG BUS IN. If multiple multi-scanners are connected
in series, the analogue line out of the next instrument must
be connected here. For applications, see section 4.3.
e
SLAVE. If multiple multi-scanners are connected in series,
the RS232 master line of the succeeding instrument must
be connected here. For applications, see section 4.3.
f
PC/Master. Connect the controlling computer here or if
multiple multi-scanners are connected in series, connect
the instrument in front to the PC/MASTER.
g
30V DC 0.5A. Power supply connection.
Use only mains adapter supplied by AMETEK in order to
comply with the requirements in EN61326 (2013).
30V DC 0.5A
SLAVE
PC / MASTER
ANALOG BUS
IN
_
+
a
c
e
b
f
g