Operation
Page 24 of 60
Easy Ramp and EasyFlex Ramp
5.2
Deploying the Ramp
Switch the vehicle's engine OFF.
Remove the ignition key.
Apply the vehicle's handbrake.
Open the tailgate.
For an EasyFlex ramp: Use the handhold to fold the ramp
back up to the vertical position, until it audibly engages
(see Figure 9).
CAUTION!
Risk of crushing when lifting the ramp to the vertical position.
When lifting the ramp to the vertical position, there is a risk
of being crushed between the ramp and the frame (rear
bumper).
Therefore:
Do not reach into the gap between ramp and frame.
Figure 9
: Folding the ramp to the vertical position (only for EasyFlex)
Check that the ramp is securely engaged in the vertical
position by gently shaking it.