Operation
Easy Ramp and EasyFlex Ramp
Page 31 of 60
Attach the electrically operated belts to the wheelchair
(see Figure 15).
Figure 15
: Attaching the Electrically Operated Belts to the Wheelchair
Operate the rocker switch such that the indicator lamp in
the rocker switch goes out.
WARNING!
Risk of injury through the wheelchair rolling backwards.
The floor section and the ramp form a slope via which the
wheelchair can roll back out of control. The passenger in the
wheelchair can be severely injured. Material damage can be
caused.
Therefore:
Attach the electrically operated belts to the wheelchair.
Operate the rocker switch such that the indicator lamp in
the rocker switch goes out.
Push or drive the wheelchair up the access ramp only
when this has been done.
Push or drive the wheelchair into the vehicle.