Operation
Page 32 of 60
Easy Ramp and EasyFlex Ramp
WARNING!
Risk of injury if the electrically operated belts loosen when
the vehicle is in motion.
If the electrically operated belts are unevenly tensioned,
they can become loose when the vehicle is in motion. There
is a risk of the passenger in the wheelchair and of the other
occupants in the vehicle being injured.
Therefore:
Push the wheelchair into the centre of the vehicle.
Make sure that the electrically operated belts leave the
belt reels at the same angle as one another.
If this is not the case, re-position the wheelchair.
Switch the motor of an electrically-driven wheelchair OFF.
Attach the retractor belts to the wheelchair.
Clip the retractor belts onto the fittings in the rear area of
the floor of the vehicle (see Figure 16).
Tension the retractor belts by tightening the belt reels.
Figure 16
: Tensioning the Retractor Belts
Apply the wheelchair's brake(s).
Retractor
belts