background image

Maintenance and Repair

 

 

 
 

Page 38 of 60

 

 

Easy Ramp and EasyFlex Ramp

 

6

 

Maintenance and Repair 

6.1

 

Safety Regulations for Maintenance 
and Repair 

 

Read the safety information before carrying out mainte-
nance and repair work (see Chapter 1, page 8). 

 

 

WARNING! 

Risk of injury through missing safety devices. 

If safety devices are removed, they will no longer fulfil their
function. 

Therefore: 

 

Always refit safety devices if they have been removed 
(e. g. for maintenance or repair purposes). 

 

 

WARNING! 

Risk of injury and material damage if maintenance and repair
work is not carried out correctly. 

Therefore: 

 

Only allow specialist personnel to carry out maintenance
and repair work. 

 

If repair work has been carried out on load bearing parts,
this must be inspected by a technical expert. 

 

 

WARNING! 

Personal injury and material damage can be caused by us-
ing inferior quality spare parts. 

The manufacturer will accept no liability whatsoever for
damage or injury caused by the use of non-original spare 
parts or spare parts that have not been approved of by the
manufacturer. 

Therefore:  

 

Use only original spare parts or spare parts that have
been approved of by the manufacturer.

 

Summary of Contents for Easy-Flex-Ramp





























































Reviews: