Hardware Description
PCI Express Cable Extender, Hardware Manual, Revision 1.2
Page
9
6.2
LEDs
Ref.
Des.
Silk screen
label
Type
Usage
D9, D10
PRSNT
Blue LEDs
Indication Present UUT card.
D1, D4
FAIL
Red LEDs
Overload protection.
D2, D5
+3V
Green LEDs
Indication power +3.3V and +12V on the
PCI express connector (on the UUT).
D3, D6
+12V
Yellow LEDs
Indication incoming power +12V from
external power supply or from host
computer.
D7, D8
RST
Red LEDs
Indication PCI Express bus RESET signal.
Table 1: LEDs
6.3
Switches
Ref. Des.
Type
Usage
SW1
switch
Switch local PCI Express bus hot-swap controller
ON/OFF.
SW2
6 position control
switch block
Please look schematic and Appendix 2.
The default
position setting: 1,2,3,4,5,6 – OFF
Table 2: Switches
Summary of Contents for PCI Express Cable Extender
Page 4: ......
