![background image](http://html1.mh-extra.com/html/amg-sicherheitstechnik/amgocam-dvr-634-2/amgocam-dvr-634-2_operating-instructions-manual_2932040003.webp)
Seite 3 von 19
AMG Sicherheitstechnik GmbH
Industrial Park Road A-9
39245 Gommern
Phone 039200-7797-0
Freecall 0800-2264264*
Fax 039200-7797-29
www.amg-sicherheitstechnik.de
info@amg-sicherheitstechnik.de
Business hours are 8-17 clock, outside this time an answering machine is switched
*) free of charge from the German fixed network and all German mobile networks
Interface
Description
LAN
The LAN port is used to the camera for teaching the recorder via an
Ethernet cable to connect.
Please do not connect a LAN cable for a
wireless connection. (depending on the model)
Netzteil DC
Connection mains adapter
12 V/1 A
.
Typical applications
1.
Connect the supplied USB mouse to the back of the USB port.
2.
Connect a monitor via VGA or HDMI.
3.
Connect an Ethernet cable to your DSL router on the WAN port.
4.
Connect the AC adapter 12V / 3A to the recorder.
5.
Connect the 12V / 1A power adapters to the "DC power supply" connector
on the IP cameras.
6.
Turn on the recorder and the cameras.
Note:
Before installing the cameras fixed at the installation, set up the radio
signal of the cameras using the procedures described below instructions
beforehand. This ensures a stable video transmission.
Set stable radio connection of the cameras
If your DVR and the cameras are far away from each other and the video
transmission is unstable, you can use the supplied cameras as a "bridge"
(repeater) for the wireless connection.
Monitor