Seite 15 von 19
AMG Sicherheitstechnik GmbH
Industrial Park Road A-9
39245 Gommern
Phone 039200-7797-0
Freecall 0800-2264264*
Fax 039200-7797-29
www.amg-sicherheitstechnik.de
info@amg-sicherheitstechnik.de
Business hours are 8-17 clock, outside this time an answering machine is switched
*) free of charge from the German fixed network and all German mobile networks
Change video images automatically
1.
Press the right mouse button and select the menu item "Menu".
2. Click General Settings> Screen Settings
3. Set the "Auto Switchover" (Auto Switchover Time 2,3,4,5, ......) -> then select
"Enable".
4. Click "OK" to save the settings
.
TV Settings
We have noticed that not all televisions accept the HDMI signal from the DVR, the
message "no supported mode" or just a black screen appears. In this case, it helps to
take the HDMI input 2 or 3 of the TV.
System Menu
Here you have an overview of the current software version as well as the possibility of
retrieving the various "QR codes" for the app "AMGoCam" (Android, IOS, Web).
In the System Admin you will find an overview of the currently used software version as
well as various "QR codes" for scanning the "AMGoCam" app (Android, IOS) or the web
address for the "AMGoCam" video server.
Firmware update take through
If required, a firmware update can be made via the menu "System Admin
System
Upgrade". Save the update which you can get from us if necessary on a USB stick. This
should not be larger than 4GB and be formatted with "FAT" or "FAT32". The USB stick is
connected via a USB hub (USB distributor) with the mouse to the recorder, go to the
menu and just press "Start".
