AMG Systems Ltd. reserves the right to make changes to this document without
notice. The information herein is believed to be accurate. No responsibility is
assumed by AMG for its use.
Page 1 of 6
AMG2783-2 Instruction
Sheet D15229-00
AMG2783-2
Instruction Manual
Dual Channel Video Insert Unit with Bi-directional Data
The
AMG2783-2
is a standalone dual channel video insert unit designed to transmit two video signals
on to a single optical fibre ring. It also provides a RS485/RS422 bi-directional data channel. It is
designed to be powered from an
AMG2002
power supply. Up to 8 video channels can be attached to
the same single fibre optic ring to transmit up to 8 real time high quality video signals.
The
AMG2783-2
is designed to operate with the
AMG2784R
eight channel video receiver and data
transceiver. Each receiver will ‘drop off’ up to eight video channels which are being transmitted around
the single fibre ring.
Index
Page No.
Introduction .......................................................................................................... 2
Unit Functional Schematic................................................................. 2
Optical System Connection ............................................................... 2
Connections ......................................................................................................... 2
Video Input connection...................................................................... 2
Optical Connections .......................................................................... 2
Power Connections ........................................................................... 3
Data Connections.............................................................................. 3
Indicators
........................................................................................................... 3
Physical Information ........................................................................................... 4
Dimensions........................................................................................ 4
Mounting Details................................................................................ 4
Configuration of the RS422/RS485 Data Channel ............................................ 4
Video Input Channel Configuration ................................................................... 4
SW1 Switch Settings ........................................................................................... 5
Removal from the Case ....................................................................................... 5
Safety
........................................................................................................... 6
Maintenance ......................................................................................................... 6
218mm
109mm
193mm between mounting slot centres
AMG
2783 -2
2 CHANNEL VIDEO
INSERT
+
BI-DIRECTIONAL
DATA
TX
O O
RX
OPTO SYNC
FRONT PANEL INDICATORS
VIDEO PRESENT
CH1
O O
CH2
CH3
O O
CH4
POWER
O
GND
+12-16 Volts dc
OPTO IN
VIDEO CH 1
VIDEO CH 2
VIDEO CH 3
VIDEO CH 4
OPTO OUT
GND
OUT-
OUT+
IN-
IN+
DATA
CONNECTIONS
INTERNAL
RS422/485
SWITCHABLE
*
TX
O O
RX
DATA PRESENT
